Eco Resin Marble Tray Tutorial

Learn how to make this easy but beautiful trinket tray with Eco Pour H2O – a ‘just add water’ eco resin from Apex Resin. This tray can easily be adapted with a huge range of colours and can be ready to un-mould in under 40 minutes.

Scroll to the bottom of the page to see our video tutorial.


Project difficulty: Easy

Project time: 40 minutes


What you’ll need

  • 200g Eco Resin – Were using Eco Pour H2O from Apex – use code RESINFORBEGINNERS to get 15% off
  • Kitchen scales – As eco pour is non toxic we just use our regular kitchen scales from Amazon and find they’re really accurate.
  • 70g Water – We use a measuring jug so we know how much were using.
  • Stirring stick / spoon – You’ll see in our video that we’re recycling an old baby spoon.
  • Pigment – We used the JDiction Resincrete pigment for this project.
  • Mixing cups – We used clean and dry yogurt pots.
  • Gloves – Although all non-toxic, gloves will save your hands from getting stained with the pigment

How it’s done

  1. Add 200g of Eco Resin to your cup.
    TIP: Go slowly as it can be messy.
  2. Next slowly begin adding your water and mix as you go. You want to aim for a pancake mix consistency that runs freely from your spoon and is smooth but is thick.
    TIP: You have around 10 minutes before your mixture really begins to set so you need to work fast.
  3. Split your mixture in to two cups.
  4. You can choose to colour both or leave one side natural like we have.
  5. If you’d like to achieve a marble effect, add 3-4 small drops of pigment and swirl only a few times with your spoon. Don;t be tempted to mix too much of you’ll loose your pattern.
  6. Next – get both mixtures and pour at the same time in to your mould so they meet at the middle at the same time.
  7. Let your piece cure for at least 30 minutes. DON’t be tempted to touch it before the time is up.
  8. Slowly un-mould your tray and sand any sharp edges very lightly if needed (although it often isn’t).

VIdeo tutorial

@resinforbeginners Want to see how this Eco Resin tray was made? Come take a look 👀 #resin #ecoresin #resinpour #asmr #resintutorial ♬ A Cup of Coffee – Muspace


Leave a Reply